Forklift Safety

Forklifts are excellent labor saving devices. They save time and reduce the likelihood of injury associated with manual material handling activities. However, forklifts can become very dangerous if operated by a reckless or untrained operator. All operators are required to receive safety training prior to being allowed to operate a forklift and must be certified on site by a manager.

Forklift accidents tend to be very serious, involving both personal injury and damage to property. These accidents can be avoided if operators use some common sense and follow safe operating procedures. Do not operate a forklift until you have been properly trained and authorized to do so. If you are asked to operate a forklift and that was not in your job description when you were dispatched, please notify Professional Staff immediately to let us know. We want to ensure safety for all employees on our jobsites.

Basic Forklift Safety Practices

Here are safety rules to follow during forklift operation:

  1. Use the seat belt. It will keep you secured in the seat in the unplanned event of a tip over.
  2. A parked forklift should have the forks flat on the floor with the controls set to neutral and with the parking brake set.
  3. A forklift is considered to be “unattended” if the operator is more than 25 feet away or if the forklift is out of the direct vision of the operator. Unattended forklifts should be parked with the power turned off.
  4. When operating the forklift on inclines, the load should always be on the uphill side of the incline. Drive forward going up the incline. Drive backward going down the incline.
  5. When traveling without a load on the forks, keep the forks approximately four to six inches off the floor.
  6. Never allow anyone to walk underneath a raised load.
  7. Stop at all blind corners to check for other traffic in the area. This includes other forklifts and pedestrians. Honk your horn and look before you proceed.
  8. If carrying a tall load that blocks your forward vision, drive in reverse and turn your head so you can see where you are going.
  9. If operating around other forklifts maintain a three-forklift length distance between forklifts and never attempt passing.
  10. Never drive a forklift up to the back of a person who is unaware that the forklift is behind them.

 

Following these simple rules will avoid many accidents and injuries. Remember to always keep safety in mind!